Rack Attack Portland-East
Rack Attack Portland-East
Rack Attack Portland East is our second store in the Portland area. Rack Attack Portland East specializes in new and used vehicle racks and hitches, and carries a wide selection for those on a budget looking for competitively-priced products. We offer fair value for trade-ins and do custom and factory-style rack and hitch installations.
At Rack Attack Portland East, we:
-
have the most knowledgeable staff in Portland, ensuring you get the best advice
-
stock the largest inventory and the best selection in Portland
-
carry all the top brands, including Thule, Yakima, Saris, TracRac, Curt and Inno
-
install everything we sell
-
specialize in factory-style installations
-
sell and install trailer hitches, including wiring
-
have a selection of used racks, and will buy your rack or accept it as a trade-in
-
have ample free parking
Custom Roof Rack Installations
Here are a few racks installed by Rack Attack Portland-East
2017 Ford Fiesta ST with Yakima control towers on a custom track system, Yakima windshield and Showcase 15 mounted on round bars.
This rack setup uses the following products:
(Some of these products are unavailable)
We suggest these current products:
Custom Roof Rack Installation - 2015 Volkswagen Jetta 4 Door - Bare Roof
This rack setup uses the following products:
(Some of these products are unavailable)
We suggest these current products:
Custom Roof Rack Installation - 2006 Dodge Magnum - Bare Roof
This rack setup uses the following products:
(Some of these products are unavailable)
We suggest these current products:
Roof Rack & Cargo Box Installation - 2013 Volvo XC60 - Flush Rail
This rack setup uses the following products:
2017 Subaru Impreza WRX/STI 4DR Track system installed with Yakima Skyline towers and a Yakima Fatcat 6.
This rack setup uses the following products:
2015 Land Rover Range Rover custom track system installed with Thule Aeroblade Edge cross bars, a Yakima Megawarrior basket and Thule Snowpack 4.
This rack setup uses the following products:
2015 Audi TT with custom cut cross bars with fixed point installation using Whispbar Flush bar and a Yakima FrontLoader bike rack.
This rack setup uses the following products:
2017 Jeep Wrangler Unlimited 4DR JK with 3 base Rhino Rack BackBone and Pioneer Platform, Thule 830 stacker mounted to the platform.
This rack setup uses the following products:
2017 Jeep Grand Cherokee bare roof. Thule Track installed, just the track no cross bars.
This rack setup uses the following products:
2016 Acura RDX custom Track system installed with Yakima Skyline towers, 60" Corebars and 54" track.
This rack setup uses the following products:
2016 Chevy Express Cargo Van with a Rhino Rack Pioneer Platform and SunSeeker Awning mounted to a custom track system.
This rack setup uses the following products:
Dodge Durango with custom tracks installed behind factory flush bar. Yakima Control towers, landing pad 1's. This is a three cross bar setup.
This rack setup uses the following products:
2017 Jeep Wrangler Unlimited 4DR Hard Top with a custom track system installed using Yakima Skyline towers, landing pad 1's, black Yakima Jetstream cross bars and a Yakima Fatcat 6 ski rack.
This rack setup uses the following products:
2017 GMC Terrain with custom tracks installed using Rhino Rack RLT600 towers and Vortex cross bars.
This rack setup uses the following products:
2016 Jeep Patriot customer tracks and a Rhino Rack Pioneer Elevation with 3 legs.
This rack setup uses the following products:
2017 Ford Focus ST customer tracks with Yakima Control towers, Landing pad 1, 40" Yakima Windshield and a Yakima Showcase 15.
This rack setup uses the following products:
2017 BMW X5 with Thule Aeroblades, 460R towers, Fit kit 4023 and the Thule 606 Flow cargo box.
This rack setup uses the following products:
Mazda CX-7 custom track installed with Thule 460R towers, Thule Aeroblades and two sets of Thule 848 HullaPort XT's.
This rack setup uses the following products:
Customer fixed point installation on a Toyota Prius using Yakima control towers, landing pad 6 and 48" cross bars.
This rack setup uses the following products:
Honda Pilot with factory side rails that just weren't cutting it. Installed custom track with three pairs of Thule 460 towers and 58" load bars.
This rack setup uses the following products:
Volkswagon Westfalia van with three Yakima Sideloader brackets mounted. Yakima 1A Raingutter towers with a Thule Motion Alpine XT cargo box.
This rack setup uses the following products:
2019 Subaru Impreza 5dr with Factory Fixed Mounting Points: system shown is Thule 460 Rapid towers with Thule AeroBlades and two RockyMounts JetLine bike trays.
This rack setup uses the following products:
2017 Infiniti QX60 with custom installed tracks, Yakima JetStream bars and a Thule Force XT XL Cargo Box.
This rack setup uses the following products:
2019 Honda Pilot with Yakima landing pad 1's and a track installed.
This rack setup uses the following products:
Honda Accord sedan with Yakima Skyline towers, Corebars and landing pad 6's installed.
This rack setup uses the following products:
Jeep Wrangler JK with Gobi Stealth rack installed.
This rack setup uses the following products:
Full Thule track system installed on 2017 Toyota Prius with Motion XT L cargo box.
This rack setup uses the following products:
2009 Toyota Tundra CrewMax w/ Rhino Rack Vortex Bars installed on the canopy
This rack setup uses the following products:
2019 Toyota Tundra with Rhino Rack's ditch tracks installed and two Thule 898 Hullavators to carry two kayaks with ease.
This rack setup uses the following products:
Tracks installed on the cab with Rhino Rack RLT600 towers and Vortex cross bars.
This rack setup uses the following products:
This 1989 Westfalia is fitted with custom brackets for a Rhino Rack Sunseeker 2.5 Awning. Also features some Yakima 1A Raingutter Towers, Yakima RoundBars and a Yakima SkyBox 16 cargo box.
This rack setup uses the following products:
(Some of these products are unavailable)
We suggest these current products:
Gobi Ladder Rack
Yakima OffGrid
This rack setup uses the following products:
